HetProcedures/RA/overview: ops_template.txt

File ops_template.txt, 3.4 KB (added by stevenj, 4 years ago)
Line 
1RA OPS for night of -- UT
2
3OPS: -- / --
4
5Summary: --
6
7    --* Started HPF PartA+C cals at --
8        PartA[44m] finishes at --
9        PartC[43m] finishes at -- (sunset is --)
10 
11    --* verify that "atq" has no jobs currently scheduled, schedule cals to run:
12
13    --* other problems/notes
14
15
16
17VHC.
18--
19
20
21
22-----NOTES------
23my preferred order:
24
25getUptime --lrs2 --virus
26(get temperatures/pressures, adjust as needed)
27ipvg off -V
28cal lrs2 -B -b 1 -pb -o 9900 -O 9900
29cal lrs2 -conf /opt/het/hetdex/etc/configfiles/vl_cals_ops.json -l qth fear -L 1 -B -b 1 -d 1 -de 300 -o 9901
30cal virus -conf /opt/het/hetdex/etc/configfiles/vl_cals_ops.json -l ldls_long cd-a hg -L 1 -B -b 1 -o 9901
31run ACQ camera mirror insertion test
32-----END OF NOTES------
33
34=========================================================================================
35MCS/LRS2/VDAS health and TCS communications:
36
37--check /var partition with: "df -h | grep var"
38
39--checked if sounds are working normally with:
40play -q /opt/het/hetdex/etc/sounds/alert-1.ogg
41
42
43
44--HPF test/LFC exposure has header keywords (RTFX, STRTAZ, etc) as expected.
45
46
47
48--ran     ssh -q lrs2 "ps ax|egrep 'lrs2_server|proxy|dt_local_nfs'|egrep -v 'tail|grep'"
49  and verified that there are 3 tasks: tcs_proxy, dt_local_nfs, lrs2_server
50
51--lrs2 RAMDISK  df -h:
52
53--LRS2 exposures have header keywords (tracker coords, x_strt, etc) as expected.
54
55
56
57--ran     ssh -q vdas "ps ax|egrep 'virus_server|proxy|dt_local_nfs|dt_tacc'|egrep -v 'tail|grep'"
58  and verified that there are 4 tasks: tcs_proxy, dt_local_nfs, dt_tacc, virus_server
59
60--vdas RAMDISK df -h:
61
62--VIRUS exposures have header keywords (tracker coords, x_strt, etc) as expected.
63
64
65
66=========================================================================================
67Queue health:
68
69--Checked for new target submissions and allocations:
70--new targets/programs
71
72--ran Tools-->Daily Calcs in HTOPX at --:--
73--MS priority code (priscript.sh) says:
74
75
76--P0 notes
77
78
79
80=========================================================================================
81HPF
82
83--[hpf@hpfserver CalScripts]$ tims detect pyhxrg:GetObsnum
84
85--[hpf@hpfserver CalScripts]$ tims het shutdown
86
87--[hpf@hpfserver HPFics]$ timshet
88
89
90(when safe from cals/PFIP opening)
91./hpf_takeLFCHRCalExposure.sh 1
92
93--Listened to the fiber agitator sounds, and all sounds normal.
94
95 --HPF PartA+C cals started at --
96        PartA[44m] finishes at --
97        PartC[43m] finishes at -- (sunset is --)
98/home/hpf/Scripts/InstConfig/CalScripts/hpf_evening_cals_PartAC.sh
99
100--VERIFIED that PartA cals have started: all slider/shutter/etc moves completed successfully and the first exposure is underway.
101
102
103
104=========================================================================================
105LRS2
106
107--uptime
108
109--temperatures/pressures
110
111
112--IP/VG off at --:--
113
114--LRS2 cals look OK.
115
116
117
118=========================================================================================
119VIRUS
120
121--uptime
122
123--temperatures/pressures
124
125--(Units pumped today: )
126
127--Adjusted:
128
129--V309 IP turned off at --:--
130
131--VIRUS cals look ok.
132
133
134VHC.
135--
136
137
138=========================================================================================
139PFIP
140
141--Probe status on arrival, from "shoprobes": (all green)
142
143--After "home5": (all yellow while moving, green when stopped)
144
145--Also did a "home1" (worked fine) and "home5" (worked fine).
146
147
148
149--:-- ran ACQ camera biases with Steve's code: (takes ~1 min)
150cd ~astronomer/acm_bias
151acm_bias_run 5
152
153
154--:-- ran ACQ camera mirror insertion test (~10min)
155acq_camera_mirror_test --.-
156
157
158
159