Changes between Version 69 and Version 70 of HetProcedures/DIMM2

Timestamp:

Oct 13, 2021 2:30:49 PM (3 years ago)

Author:

sco

Comment:

--

HetProcedures/DIMM2

@@ -500 +500 @@
 1. Exit DIMM software choosing to warm up the CCD.
 2. Exit PHD2 software.
-3. Save alignment and park mount choosing the previous park position if the telescope has acquired GPS lock.  This will park the telescope so that it is pointed in line with the HET structure. [[br]]
+3. In CPWI software under Alignment, select "Park and Save Alignment" (as seen in Figure 8 above). Choose the previous park position if the telescope has acquired GPS lock.  This will park the telescope so that it is pointed in line with the HET structure. [[br]]
   ** NOTE: If the telescope has not connected to GPS, it will not be able to park. Instead:
    * Choose "Mount, Disable Tracking"