Changes between Version 5 and Version 6 of HetProcedures/RA/TO_EMT

Timestamp:

Mar 27, 2018 5:35:51 AM (6 years ago)

Author:

ebevins

Comment:

--

HetProcedures/RA/TO_EMT

@@ -47 +47 @@
 
 The air compressor for the structure will need to be shut down, and in order to complete this, you need to go to the Krabbenhut. On your way out to the k-hut, you can check to ensure that the CCAS shutter is closed by shining your flash light up at CCAS. Once inside of the K-Hut, look find the Air compressor switch. It is the device to the right of the Quincy, or the far right corner of the K-Hut. At the top of this, there is a '''yellow handle you will need to pull down''' towards you. Once ytou have pulled the handle as far as it can go, hit the Black '''OFF''' switch on the device. Caution, the K-Hut can get loud when the Quincy discharges air. Earplugs, if you would like them, can be found in the cabinets at the base of the stair case in the loading bay. 
+Once you are done with shutting down the compressor and ensuring CCAS is closed, return to the control room. 
+
+
+'''
+Step 5: Stowing the tracker'''[[BR]]
+
+
+On the '''TCS gui''' select the tracker tab. On this, a set of arrows will appear with '''preset tracker positions'''. If the tab opens and the preset positions are not obviously found, look at the tabs below the velocity and motion section of the tracker tab. Once you have located the present locations for the tracker, select the '''Home''' button in the lower center section of the presets. The arrow is labeled home, so it is hopefully fairly obvious which preset to go to. At this point you do not need to do anything more. The tracker does have brakes, but they automatically engaged after 10 minutes of idle time. 
 
 
 
+'''
+Step 6: Stopping ACAM'''[[BR]]
+
+ACAM is the only camera which needs to be shut down in order to preserve the shutter on it. On the TCS gui, there are several tabs which are detached to their own screens. The ACAM is almost cerntainly going to be one of them. Scan the task bar to find the tap labeled '''ACQ Camera'''. Select this and locate the '''Stop Metrology Loop'''. Once hit, this button should up date to 'Start Metrology Loop'. If you found the button already in the start phase, then the shutter is not going and no further action is required. 
+ 
+
+
+
+'''
+Step 7: Shutting down CCAM'''[[BR]]
+
+The final task is to shut down CCAM. On the KVM monitor, hit the '''Scroll lock''' button twice to reach the selection screen. This button has a white sticker on it in case you are having a difficult time locating it. Once you have hit this button twice a screen listing different computers should come up. Scroll using the up and down arrow keys and select the computer labeled '''Stratus'''. On Stratus, the CCAM should already be open. If it is not, open up Microsoft explorer on the desktop and it will open up to the CCAM controls. There are '''four things to shut down on CCAM'''. The '''first''' it to take it out of '''tour mode'''. Under settings (found at the top of the CCAM screen) select '''preset position''' listed on the lower left side. This will open up on the Position tab, however you will need to switch to the '''Tour''' tab found at the top of the screen. Once you are on the tour tab go to the '''tour selection''' and select '''None'''. 
+'''Second step''' will be to go back to the main screen which shows the live camera feed. On the left side, locate the '''Preset Position''' drop down menu and select HET. This will put the camera safely out of the way of the Sun. 
+'''Third Step''' You need to go back to settings and select the '''Camera tab'''. This will open you on the Common tab, but you will want to use the Picture tab. '''Select the picture tab''' at the top of the screen. From here, select the '''Full Auto Mode''' and turn '''Slow Shutter to Off'''. 
+'''Fourth Step''' Go back to the main screen with the live view of the camera and on the lower left, locate the '''DAY/NIGHT''' section. Hit the air button the left side and this will switch the camera to day mode. 
+
+On your way out, check that all outside doors to leading into HET are secured and locked. 
+
+
+
+
+