Changes between Version 6 and Version 7 of HetProcedures/RA/guideprobes

Timestamp:

Mar 6, 2016 2:06:53 AM (8 years ago)

Author:

shetrone

Comment:

--

HetProcedures/RA/guideprobes

@@ -25 +25 @@
 One can move the probes in this X and Y coordinate system:   
 
-Command:  {{{ syscmd -v -T 'Guider1_set_position( x_ang=XVALUE, y_ang=YVALUE) ' }}}  where XVALUE and YVALUE are in degrees
+Command:  {{{ syscmd -v -T 'Guider1_set_position( x_ang=XVALUE, y_ang=YVALUE) ' }}}  where XVALUE and YVALUE are in degrees <br>
           {{{ syscmd -v -T 'pfip_move_probes()' }}} 
 
-Examples: 
-     {{{  syscmd -T -v 'Guider1_set_position( x_ang=0.16, y_ang=0.00) ' }}}
-     {{{  syscmd -T -v 'Guider2_set_position( x_ang=-0.16, y_ang=0.00) ' }}}
-     {{{  syscmd -T -v 'WFS1_set_position( x_ang=0.00, y_ang=0.16) ' }}}
-     {{{  syscmd -T -v 'WFS2_set_position( x_ang=0.00, y_ang=-0.16) ' }}}
+Examples: <br>
+     {{{  syscmd -T -v 'Guider1_set_position( x_ang=0.16, y_ang=0.00) ' }}} <br>
+     {{{  syscmd -T -v 'Guider2_set_position( x_ang=-0.16, y_ang=0.00) ' }}} <br>
+     {{{  syscmd -T -v 'WFS1_set_position( x_ang=0.00, y_ang=0.16) ' }}} <br>
+     {{{  syscmd -T -v 'WFS2_set_position( x_ang=0.00, y_ang=-0.16) ' }}} <br>
      {{{ syscmd -v -T 'pfip_move_probes()' }}} 
 
@@ -40 +40 @@
 from htopx3.    Thus in theory the target needs to be at the reference location, usually the IHMP position.
 
-Examples:
-     {{{  syscmd -T -v 'Guider1_set_position( ra=12.0403092, dec=-5.0593855, equinox=2000.0) ' }}}
-     {{{  syscmd -T -v 'Guider1_set_position( ra=12.0403092, dec=-5.0593855 ) ' }}}
-     {{{ syscmd -v -T 'pfip_move_probes()' }}} 
+Examples: <br>
+     {{{  syscmd -T -v 'Guider1_set_position( ra=12.0403092, dec=-5.0593855, equinox=2000.0) ' }}} <br>
+     {{{  syscmd -T -v 'Guider1_set_position( ra=12.0403092, dec=-5.0593855 ) ' }}} <br>
+     {{{ syscmd -v -T 'pfip_move_probes()' }}}  <br>