Changes between Version 270 and Version 271 of HetProcedures/RA/lrs2

Timestamp:

Jul 27, 2022 8:21:23 AM (22 months ago)

Author:

stevenj

Comment:

--

HetProcedures/RA/lrs2

@@ -284 +284 @@
 *  For a constant value in an amp you only need to restart the LRS2 server (service), without cycling power to anything.
 *  For a readout that looks like hash or huge noise you need to restart the server (service) and the controller (using APC tab in TCS GUI)
+*  For repeating data you will need to restart the controllers and muxes
 *  For an error in the /var/log/tcs_logs/lrs2/lrs2_server.log that includes an error with "MUX"; you need to restart the server (service), controller (APC tab) and mux (APC tab).
 
@@ -293 +294 @@
 
 
-1. From the RA launcher under '''Operations''' and '''Servers''' and '''LDAS Camra''' select '''stop'''.  This is equivalent to the old way  "From your account on lrs2:  If running, stop ldas {{{ sudo service ldas stop }}}"[[BR]]
+1. From the RA launcher choose: '''Operations''' and '''Camra Servers''' and '''LRS2 Server''' select '''Stop'''[[BR]]
 2. On the APC GUI Power off hardware LRS2 controller  [[BR]]
 3. Turn off the '''LRS2MUX''' on the APC GUI [[BR]]
@@ -300 +301 @@
 5. Wait 30 seconds then on the APC GUI Power on LRS2MUX [[BR]]
 [[Image(LRS2Mux.png)]]
-6. From the RA launcher under '''Operations''' and '''Servers''' and '''LDAS Camra''' select '''start'''.  This is equivalent to the old way  "From your account on lrs2:  If running, stop ldas {{{ sudo service ldas start }}}"[[BR]]
+6. From the RA launcher choose: '''Operations''' and '''Camra Servers''' and '''LRS2 Server''' select '''Restart'''.
 7. Watch the /var/log/tcs_logs/lrs2/lrs2_server.log for messages about Accepting commands {{{ tail -f /var/log/tcs_logs/lrs2/lrs2_server.log }}}  [[BR]]
 8. then take a test exposure {{{ cal lrs2  -b 1 -d 0 -o 5555 }}}