This is a procedure that is pertinent to a particular test:

1.) Get the exposure times for each filter from the RA, then for each filter:

2.) Set the camera's exposure time to the requested exposure time.

3.) Set the camera's filter to the requested filter.

4.) Watch the filter status update on the gui. When the correct filter is shown in the filter status, note the image count on the camera.

5.) When the image count on the camera increments, check the box to store images and wait for the image count to increment again.

6.) When the image count on the camera increments again, uncheck the box to store images.

7.) Go back to step 2 and repeat for each requested filter.