20160711 Commissioning Plan
Priorities for test are in the order listed in the plan below.
If you can open
Telescope functional tests
Purpose: Try a few basic tests to see if the telescope is operating in a normal fashion.
Procedure:
- 8 position pointing test near center of track
- Focus curve with GC1, GC2, and ACAM (can be done separately)
- Check theta and phi position to get good image quality
- Check DMI value at best GC1 or GC2 focus just after stacking.
Finding the center of the good UV chip on ACAM
Purpose: We need to find the center of the good UV chip on the ACAM. For science targets that need decent UV response.
Procedure:
- Setup on a brightish star (14th) on LRS2B
- Take a spectrum with LRS2
- Look at instructions under Setup of LRS2 Observation for how to move around to in Telescope Offsets to get the correct position.
- Offset the guider and telescope in a controlled way and take a new exposure.
- Repeat until you have good centering on UV chip.
- Insert the ACAM and record the star position in X and Y.
- Document results on wiki and in e-mail.
Last modified 8 years ago
Last modified on Jul 11, 2016 10:58:15 PM