= 20160711 Commissioning Plan =

Priorities for test are in the order listed in the plan below.

-------------


== If you can open ==


=== Telescope functional tests ===

Purpose:  Try a few basic tests to see if the telescope is operating in a normal fashion.

Procedure:  
*  8 position pointing test near center of track
*  Focus curve with GC1, GC2, and ACAM (can be done separately)
*  Check theta and phi position to get good image quality
*  Check DMI value at best GC1 or GC2 focus just after stacking.

=== Finding the center of the good UV chip on ACAM ===

Purpose:  We need to find the center of the good UV chip on the ACAM.  For science targets that need decent UV response.

Procedure:  
*  Setup on a brightish star (14th) on LRS2B
*  Take a spectrum with LRS2
*  Look at instructions under [wiki:HetProcedures/RA/lrs2#setup Setup of LRS2 Observation] for how to move around to in Telescope Offsets to get the correct position.
*  Offset the guider and telescope in a controlled way and take a new exposure.
*  Repeat until you have good centering on UV chip.
*  Insert the ACAM and record the star position in X and Y.
*  Document results on wiki and in e-mail.