| 86 | === Science with LRS2-R === |
| 87 | |
| 88 | Purpose: LRS2-R is available ifor shared-risk observatipns (beware of grouped targets with LRS2-). |
| 89 | |
| 90 | Procedure: |
| 91 | * The LRS2-B channel was returned to Austin on 20161118 UT and not available until further notice |
| 92 | * You can use shuffle with the setup files from {{{shuffle_config_matt}}} or to try to compensate for the new ACAM angles try {{{shuffle_config_matt3}}} |
| 93 | * Do a blind offset setup, ie. do_shuffle with 066 (Red) |
| 94 | * If time is available, it would be useful to make a trajectory_offset to the LRS2-B position after the R channel observation is completed. After the offset is made, obtain an ACAM image and log the name of the image. We can use these images to assess how repeatabloe the offsets are. This can be done with probes='FALSE' or with probes='TRUE'. |
| 95 | |
| 96 | === Science with VIRUS Engineering === |
| 97 | |
| 98 | Purpose: Observe SHELA fields in the ENG16-2-666 program. |
| 99 | |
| 100 | Procedure: |
| 101 | * Use do_shuffle to set up on the 000 position |
| 102 | * You can use shuffle with the setup files from {{{shuffle_config_matt}}} or to try to compensate for the new ACAM angles try {{{shuffle_config_matt3}}} |
| 103 | * Conduct the VIRUS observation using dither.py |
| 104 | |
| 105 | |
100 | | |
101 | | == Science with LRS2-R and VIRUS Engineering (LOWEST PRIORITY) == |
102 | | |
103 | | Purpose: LRS2-R is available ifor shared-risk observatipns (beware of grouped targets with LRS2-). |
104 | | |
105 | | Procedure: |
106 | | * The LRS2-B channel was returned to Austin on 20161118 UT and not available until further notice |
107 | | * You can use shuffle with the setup files from {{{shuffle_config_matt}}} or to try to compensate for the new ACAM angles try {{{shuffle_config_matt3}}} |
108 | | * Do a blind offset setup, ie. do_shuffle with 066 (Red) |
109 | | * If time is available, it would be useful to make a trajectory_offset to the LRS2-B position after the R channel observation is completed. After the offset is made, obtain an ACAM image and log the name of the image. We can use these images to assess how repeatabloe the offsets are. This can be done with probes='FALSE' or with probes='TRUE'. |