Changes between Version 6 and Version 7 of NightOperations/Commissioning/Plans/20161218

Timestamp:

Dec 18, 2016 3:27:22 AM (7 years ago)

Author:

shetrone

Comment:

--

NightOperations/Commissioning/Plans/20161218

@@ -30 +30 @@
  * Setup on IHMP 
  * Center up both guide probes and start guiding on one of the guiders
+ * Set Exposure times for CWFS, WFS1 and WFS2 to about 5 seconds to assist in centering.
  * Offset to CWFS using {{{syscmd -T 'offset_trajectory(dx_ang=-5.5, dy_ang=0.0, adjust_probes="true")'}}}
  * Tweak up the position on the IHMP using further offset_trajectory commands.
@@ -35 +36 @@
  * Null out focus on WFS1.  NOTE:  WFS1 seems to perform better than WFS2 at the edges of the track
  * Start metrology loop and Activate the loop on WFS1.
+ * Increase the exposure time for the CWFS, WFS1 and WFS2 to greater than 20 seconds for data taking.
  * Hit "store images" and "Start Metrology Loop"  for GC1, GC2, WFS1, WFS2, TT, CWFS, DMI (although there are no images for DMI)
  * Run until the end of the track.