| 113 | === Characterize LRS2-B to LRS2-R offsets === |
| 114 | |
| 115 | * Start a trajectory |
| 116 | * setup on ACAM and one guide probe at the LRS2-B location. |
| 117 | * offset from LRS2-B to LRS2-R using: {{{B2R: syscmd -T 'offset_trajectory(dx_ang=-101, dy_ang=+4, adjust_probes="true")'}}} |
| 118 | * Guider should stay in Active mode |
| 119 | * Allow guider to catch the star and drag to the final position |
| 120 | * once the guider has settled to position measure the position on ACAM and report in the RA report. |
| 121 | * have the TO center the object on the LRS2-R and set new guider fiducial. |
| 122 | * offset from LRS2-R to LRS2-B using: {{{B2R: syscmd -T 'offset_trajectory(dx_ang=-101, dy_ang=+4, adjust_probes="true")'}}} |
| 123 | * Guider should stay in Active mode |
| 124 | * Allow guider to catch the star and drag to the final position |
| 125 | * once the guider has settled to position measure the position on ACAM and report in the RA report. |
| 126 | |
| 127 | Repeat this test 5 times. |
| 128 | |
| 129 | |