Changes between Version 10 and Version 11 of NightOperations/Commissioning/Plans/20180928

Timestamp:

Sep 29, 2018 11:32:48 PM (6 years ago)

Author:

shetrone

Comment:

--

NightOperations/Commissioning/Plans/20180928

@@ -1 +1 @@
 = Parts Borrowed From 20180726 =
 
-== Twilights ==
 
-LRS2 and VIRUS twilights should be taken at the center of track position.   Please follow the start of the night procedures on the wiki.  
-
-    
 == Priorities ==
 
+* Closed dome engineering tests (many of which can be done at OPS
+* Twilight tests
 * Open dome engineering tests
-* Closed dome engineering tests
 * Science targets
 * Long cals
+
 
 == Closed dome engineering tests
@@ -47 +45 @@
   *  Note how much rotation is required from the central one to the new off-axis position and this is the delta angle to report to the TCS team.
 
+
+== Twilight ==
+
+=== Standard science twilights ===
+
+LRS2 and VIRUS twilights should be taken at the center of track position.   Please follow the start of the night procedures on the wiki.  
+
+=== Creating new Guider flats ===
+
+Take Guider B, g, r, i, none twilight flats for both gc1 and gc2.    These can be started at the same time as the LRS2 or VIRUS twilights are going.
+
+Procedure:
+  *  Start with filters B, g, r, i and then none 
+  *  Take 5-10 images with 30k flux in the IFU (with RAW counts no need to have processing on).
+  *  Follow the script XXXX to reduce the flats (TBD)
+  *  Install the flats and any changes to the bias regions to {{{ /opt/het/hetdex/etc/configfiles/flats }}}
+  *  Restart pas and the gui
+  *  Look at the guiders and see if the bad fibers are removed by the flat...
+  *  If all looks good inform the TCS team to save the flats to svn.
+
+   
 == Dome Open Tests ==