Changes between Version 2 and Version 3 of NightOperations/Commissioning/Procedures/CCASDMI.v1
- Timestamp:
- Feb 26, 2016 7:34:38 AM (8 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
NightOperations/Commissioning/Procedures/CCASDMI.v1
v2 v3 7 7 * Stack the mirror as usual to get your mirror prepped for quick stacks 8 8 * Turn off the dmifocus option in AOA software by toggling the command "dmifocus" 9 * Move the MARS focus stage to the starting DMI position (for winter probably 26.2115, summer 26.210)[[BR]]9 * Move the MARS focus stage in to the starting DMI position (for winter probably 26.2115, summer 26.210)[[BR]] 10 10 11 11 NOTE: To measure the DMI position go to the DMI on the VNC and zoom in on the plot until you can get a good DMI value out to 5 digits[[BR]] … … 14 14 * Run a measurement curve on the HEFI. If you get a bad looking curve try adjusting the exposure time, starting hefi focus position, running it again or as a last resort restarting HEFI. 15 15 * Record: DMI value, EE50, EE80, HEFI focus, MARS focus, Tout, Tdome, Ttruss, Wind dir, Wind speed, UT time 16 * move +300 infocus and repeat16 * move +300 out focus and repeat 17 17 * Test ends when you pass through a minimum stack size (should be better than 0.5") and reach stack minimum of greater than 0.8". 18 18