Twilight Imaging v01

Twilight images with CWFS, PV

Purpose: We have seen some shift in the position of the pupil when the DWFS8 was remounted. We would like to document if there are any temperature affects.

Procedure:

1) Move the dome and structure to 0 (155 if wind is an issue)
2) Move the tracker to the center on sphere (0,0,0,0,0,0)
3) Move out the ACQ arm and move in the CWFS arm
4) Move the slide to the CWFS and save twilight image (flux ~150)
5) Move the slide to the PV and save twilight image (flux ~150)
6) record all required data and move images to the NWD

Data to save

1) Save the data dump
2) Save the names of the twilight images saved
3) Save the truss temp

Analysis: Report saved data in the RA log