| 1 | |
| 2 | |
| 3 | = Twilight images with PV to support mirror swaps v02 = |
| 4 | |
| 5 | |
| 6 | Purpose: We would like to image mirror in the array with the PV camera in twilight. |
| 7 | |
| 8 | Procedure: [[BR]] |
| 9 | 1) Move the dome and structure to 0 (155 if wind is an issue)[[BR]] |
| 10 | 2) Move out the ACQ arm and move in the CWFS/PV arm[[BR]] |
| 11 | 3) Move the slide to the PV [[BR]] |
| 12 | 4) Move the tracker to the center [[BR]] |
| 13 | 5) save twilight image (flux ~150)[[BR]] |
| 14 | 4) Move the tracker to the upper right [[BR]] |
| 15 | 5) save twilight image (flux ~150)[[BR]] |
| 16 | 4) Move the tracker to the lower right [[BR]] |
| 17 | 5) save twilight image (flux ~150)[[BR]] |
| 18 | 4) Move the tracker to the upper left [[BR]] |
| 19 | 5) save twilight image (flux ~150)[[BR]] |
| 20 | 4) Move the tracker to the lower left [[BR]] |
| 21 | 5) save twilight image (flux ~150)[[BR]] |
| 22 | 6) record all required data and move images to the NWD[[BR]] |
| 23 | |
| 24 | Data to save [[BR]] |
| 25 | 1) Save the data dump[[BR]] |
| 26 | 2) Save the names of the twilight images saved[[BR]] |
| 27 | |
| 28 | Analysis: Report saved data in the RA log |