Changes between Version 28 and Version 29 of TOManual/Remote

Timestamp:

Sep 23, 2022 7:03:51 PM (20 months ago)

Author:

gdamm

Comment:

--

TOManual/Remote

@@ -135 +135 @@
 ====   1. !Hardware/Software Preparation ==== #e1
       a. Make sure that your Remote Unit is plugged into power and internet. This unit should also be located such that the EMO button is readily accessible in the event of a problem and the indicator LEDs are visible.
-      b. Open the web server on your Remote unit. On your browser, this is located at {{{ 192.168.5.2:2000}}}.
-      c. Open the web server for the Central unit in the Room. To do so, you must be connected by a VPN or other means to the HET network. Within the HET private network, on your browser, the Central unit is located at {{{192.168.66.72:2000}}}
-      d. Make sure that the Central Unit’s !Run/Test GUI indicator is green, in the ‘Run’ mode
-      e. Ensure that the EMO button on the Remote unit is not pressed down. If it is, rotate the button until it pops back up.
+      b. Connect to the HET VPN or by other means to the HET private network.
+      c. Open the web server on your Remote unit. On your browser, this is located at Amy:{{{206.76.138.27:2000}}}, Cassie:{{{206.76.138.28:2000}}}, Justen:{{{206.76.138.13:200}}}.
+      d. Open the web server for the Central unit in the Room. Within the HET private network, on your browser, the Central unit is located at {{{192.168.66.72:2000}}}
+      e. Make sure that the Central Unit’s !Run/Test GUI indicator is green, in the ‘Run’ mode
+      f. Ensure that the EMO button on the Remote unit is not pressed down. If it is, rotate the button until it pops back up.
 
 ====   2. Setup Communications and Control ==== #e2
@@ -174 +175 @@
 [[br]]
 
-====   5. Activate an HET Estop ==== #e5
-      a. In order to activate an Estop, simply press the EMO button on the Remote unit.
-      b. This action is verified by observing the ‘Estop Asserted’ LED on the Remote unit turning red and the ‘HET Estop’ indicator on the Remote unit GUI also turning red. This indication is feedback from the HET hardwired Estop system. This indicator will show an asserted Estop, regardless of initiation, local or remote.
-      c. To release an Estop, rotate the EMO button until it pops back up.
-
-====   6. Test the Estop ==== #e6
+
+====   5. Test the Estop Using Test Mode, This will not activate the HET EStop ==== #e6
       a. In order to test the operation of the Remote Networked Estop System, place the Run/Test toggle switch on the Central unit into the Test position.
       b. When a Remote unit EMO button is pressed, it will appear that an HET Estop has been asserted. While the toggle switch is in the Test position, no Estop can be actuated by the Remote Networked Estop System.
@@ -186 +183 @@
          ii. Place the !Run/Test toggle switch back into the Run position
 
-
-[[br]]
-
-====   7. Typical Scenarios for Remote Enclosure Indicators ==== #e7
+====   6. Activate an HET Estop ==== #e5
+      a. Make sure that the !Run/Test toggle switch on the Central unit is in the Run position.
+      b. To activate an Estop, simply press the EMO button on the Remote unit.
+      c. This action is verified by observing the ‘Estop Asserted’ LED on the Remote unit turning red and the ‘HET Estop’ indicator on the Remote unit GUI also turning red. This indication is feedback from the HET hardwired Estop system. This indicator will show an asserted Estop, regardless of initiation, local or remote.
+      d. To release an Estop, rotate the EMO button until it pops back up.
+
+
+
+[[br]]
+
+====   7. Typical Scenarios for Remote Enclosure Indicators, Reference only, Not required for testing ==== #e7
 
    [[Image(figa.jpg, 200px)]] [[br]]