92 | | '''Figure 7:'''Initialize tab on Control Desk, compare abs and relative values which should be close to zero. [[BR]][[BR]] |
93 | | If the offsets are not close to zero and/or you still have a skew fault/sensor reading after removing the skew, then someone who is familiar with the engineering aspects of TMCS should called to fix the fault. |
| 92 | '''Figure 7:'''Initialize tab on Control Desk, compare abs and relative values which should have an offset close to zero. [[BR]][[BR]] |
| 93 | If the offsets are not close to zero and/or you still have a skew fault/sensor reading after removing the skew, then someone who is familiar with the engineering aspects of TMCS should be called to fix the fault. |